dmesg - bog standard
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-32-generic (buildd@lgw01-43) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #37~14.04.1-Ubuntu SMP Thu Oct 22 09:41:40 UTC 2015 (Ubuntu 3.19.0-32.37~14.04.1-generic 3.19.8-ckt7)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000073bdbfff] usable
BIOS-e820: [mem 0x0000000073bdc000-0x0000000073bdcfff] ACPI NVS
BIOS-e820: [mem 0x0000000073bdd000-0x0000000073c06fff] reserved
BIOS-e820: [mem 0x0000000073c07000-0x0000000073c56fff] usable
BIOS-e820: [mem 0x0000000073c57000-0x0000000074355fff] reserved
BIOS-e820: [mem 0x0000000074356000-0x0000000076e59fff] usable
BIOS-e820: [mem 0x0000000076e5a000-0x00000000777b2fff] reserved
BIOS-e820: [mem 0x00000000777b3000-0x0000000077f99fff] ACPI NVS
BIOS-e820: [mem 0x0000000077f9a000-0x0000000077ffefff] ACPI data
BIOS-e820: [mem 0x0000000077fff000-0x0000000077ffffff] usable
BIOS-e820: [mem 0x0000000078000000-0x00000000780fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000475ffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z170M-ITX/ac, BIOS P2.30 04/19/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x476000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 007C000000 mask 7FFC000000 uncachable
2 base 007A000000 mask 7FFE000000 uncachable
3 base 0079000000 mask 7FFF000000 uncachable
4 base 0078800000 mask 7FFF800000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: last_pfn = 0x78000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fc640-0x000fc64f] mapped at [ffff8800000fc640]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000096000] 96000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x475e00000-0x475ffffff]
[mem 0x475e00000-0x475ffffff] page 2M
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
init_memory_mapping: [mem 0x460000000-0x475dfffff]
[mem 0x460000000-0x475dfffff] page 2M
init_memory_mapping: [mem 0x440000000-0x45fffffff]
[mem 0x440000000-0x45fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x73bdbfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x739fffff] page 2M
[mem 0x73a00000-0x73bdbfff] page 4k
init_memory_mapping: [mem 0x73c07000-0x73c56fff]
[mem 0x73c07000-0x73c56fff] page 4k
BRK [0x01fd8000, 0x01fd8fff] PGTABLE
init_memory_mapping: [mem 0x74356000-0x76e59fff]
[mem 0x74356000-0x743fffff] page 4k
[mem 0x74400000-0x76dfffff] page 2M
[mem 0x76e00000-0x76e59fff] page 4k
BRK [0x01fd9000, 0x01fd9fff] PGTABLE
init_memory_mapping: [mem 0x77fff000-0x77ffffff]
[mem 0x77fff000-0x77ffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x43fffffff]
[mem 0x100000000-0x43fffffff] page 1G
RAMDISK: [mem 0x34534000-0x36291fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x0000000077F31098 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x0000000077F52028 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x0000000077F311E8 020E3B (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x0000000077F99F80 000040
ACPI: APIC 0x0000000077F52138 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x0000000077F521C0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x0000000077F52208 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x0000000077F522A8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x0000000077F522E8 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
ACPI: SSDT 0x0000000077F52320 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: LPIT 0x0000000077F52690 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x0000000077F52728 00002B (v02 INTEL UsbCTabl 00001000 INTL 20120913)
ACPI: DBGP 0x0000000077F52758 000034 (v01 INTEL 00000000 MSFT 0000005F)
ACPI: DBG2 0x0000000077F52790 000054 (v00 INTEL 00000000 MSFT 0000005F)
ACPI: SSDT 0x0000000077F527E8 000616 (v02 INTEL xh_rvp08 00000000 INTL 20120913)
ACPI: AAFT 0x0000000077F52E00 00029F (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: SSDT 0x0000000077F530A0 005212 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: UEFI 0x0000000077F582B8 000042 (v01 00000000 00000000)
ACPI: SSDT 0x0000000077F58300 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: DMAR 0x0000000077F59158 0000A8 (v01 INTEL SKL 00000001 INTL 00000001)
ACPI: ASF! 0x0000000077F59200 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000475ffffff]
NODE_DATA(0) allocated [mem 0x475ff7000-0x475ffbfff]
[ffffea0000000000-ffffea0011dfffff] PMD -> [ffff880465a00000-ffff8804755fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x475ffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009bfff]
node 0: [mem 0x00100000-0x73bdbfff]
node 0: [mem 0x73c07000-0x73c56fff]
node 0: [mem 0x74356000-0x76e59fff]
node 0: [mem 0x77fff000-0x77ffffff]
node 0: [mem 0x100000000-0x475ffffff]
Initmem setup node 0 [mem 0x00001000-0x475ffffff]
On node 0 totalpages: 4114124
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 7517 pages used for memmap
DMA32 zone: 481073 pages, LIFO batch:31
Normal zone: 56704 pages used for memmap
Normal zone: 3629056 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x79000000-0x88ffffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x73bdc000-0x73bdcfff]
PM: Registered nosave memory: [mem 0x73bdd000-0x73c06fff]
PM: Registered nosave memory: [mem 0x73c57000-0x74355fff]
PM: Registered nosave memory: [mem 0x76e5a000-0x777b2fff]
PM: Registered nosave memory: [mem 0x777b3000-0x77f99fff]
PM: Registered nosave memory: [mem 0x77f9a000-0x77ffefff]
PM: Registered nosave memory: [mem 0x78000000-0x780fffff]
PM: Registered nosave memory: [mem 0x78100000-0x78ffffff]
PM: Registered nosave memory: [mem 0x79000000-0x88ffffff]
PM: Registered nosave memory: [mem 0x89000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x89000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880475c00000 s86144 r8192 d32640 u524288
pcpu-alloc: s86144 r8192 d32640 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4049818
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x1f, cntxt size 0x440 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16085224K/16456496K available (7920K kernel code, 1174K rwdata, 3756K rodata, 1408K init, 1292K bss, 371272K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:1024 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: Unable to calibrate against PIT
tsc: using HPET reference calibration
tsc: Detected 3696.039 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7392.07 BogoMIPS (lpj=14784156)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20141107/dswload-210)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20141107/psobject-224)
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 8 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
ftrace: allocating 30021 entries in 118 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
dmar: RMRR base: 0x00000077555000 end: 0x00000077574fff
dmar: RMRR base: 0x00000078800000 end: 0x00000088ffffff
IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
HPET id 0 under DRHD base 0xfed91000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i3-6100 CPU @ 3.70GHz (fam: 06, model: 5e, stepping: 03)
TSC deadline timer enabled
Performance Events: no PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (29568.31 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x73bdc000-0x73bdcfff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x777b3000-0x77f99fff] (8286208 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 11:56:43, date: 06/09/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 21 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880463019800 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880463773000 000726 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880463773800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880463064400 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x89000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff]
pci 0000:00:00.0: [8086:190f] type 00 class 0x060000
pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf230000-0xdf23ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdf24e000-0xdf24efff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf24d000-0xdf24dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf248000-0xdf249fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf24c000-0xdf24c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf24b000-0xdf24b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:a11b] type 01 class 0x060400
pci 0000:00:1d.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:a11f] type 01 class 0x060400
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf244000-0xdf247fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf240000-0xdf243fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf220000-0xdf22ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf24a000-0xdf24a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xdf200000-0xdf21ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1d.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xdf104000-0xdf104fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xdf100000-0xdf103fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1d.3: PCI bridge to [bus 03]
pci 0000:00:1d.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1d.3: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:04:00.0: [10ec:8821] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:04:00.0: reg 0x18: [mem 0xdf000000-0xdf003fff 64bit]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1d.7: PCI bridge to [bus 04]
pci 0000:00:1d.7: bridge window [io 0xd000-0xdfff]
pci 0000:00:1d.7: bridge window [mem 0xdf000000-0xdf0fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 7F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
e820: reserve RAM buffer [mem 0x73bdc000-0x73ffffff]
e820: reserve RAM buffer [mem 0x73c57000-0x73ffffff]
e820: reserve RAM buffer [mem 0x76e5a000-0x77ffffff]
e820: reserve RAM buffer [mem 0x476000000-0x477ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0280-0x028f] has been reserved
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: [io 0x02a0-0x02af] has been reserved
system 00:00: [io 0x02b0-0x02bf] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1800-0x18fe] could not be reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0800-0x087f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x1854-0x1857] has been reserved
system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xdffc0000-0xdffdffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0xff00-0xfffe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1d.0: PCI bridge to [bus 02]
pci 0000:00:1d.3: PCI bridge to [bus 03]
pci 0000:00:1d.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1d.3: bridge window [mem 0xdf100000-0xdf1fffff]
pci 0000:00:1d.7: PCI bridge to [bus 04]
pci 0000:00:1d.7: bridge window [io 0xd000-0xdfff]
pci 0000:00:1d.7: bridge window [mem 0xdf000000-0xdf0fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x89000000-0xdfffffff]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xdf000000-0xdf0fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 30072K (ffff880034534000 - ffff880036292000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x6fbdc000-0x73bdc000] (64MB) mapped at [ffff88006fbdc000-ffff880073bdbfff]
microcode: CPU0 sig=0x506e3, pf=0x2, revision=0x74
microcode: CPU1 sig=0x506e3, pf=0x2, revision=0x74
microcode: CPU2 sig=0x506e3, pf=0x2, revision=0x74
microcode: CPU3 sig=0x506e3, pf=0x2, revision=0x74
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1465473403.528:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1d.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1d.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1d.3: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1d.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1d.7: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1d.7:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 94
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-32-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-32-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 0c8befe0c1e289e4d8990926117ada3bdfeb419c'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 4:731:933
rtc_cmos 00:03: setting system clock to 2016-06-09 11:56:43 UTC (1465473403)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
Freeing unused kernel memory: 340K (ffff880001bab000 - ffff880001c00000)
systemd-udevd[122]: starting version 204
wmi: Mapper loaded
ahci 0000:00:17.0: version 3.0
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
r8169 0000:03:00.0 eth0: RTL8168h/8111h at 0xffffc9000003a000, d0:50:99:89:07:c8, XID 14100800 IRQ 128
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0x33 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf24b000 port 0xdf24b100 irq 127
ata2: SATA max UDMA/133 abar m2048@0xdf24b000 port 0xdf24b180 irq 127
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xdf24b000 port 0xdf24b300 irq 127
ata6: SATA max UDMA/133 abar m2048@0xdf24b000 port 0xdf24b380 irq 127
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
usb 1-3: new low-speed USB device number 2 using xhci_hcd
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: disabling queued TRIM support
ata6.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
ata6.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata6.00: supports DRM functions and may not be fully accessible
ata6.00: disabling queued TRIM support
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
sd 5:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 5:0:0:0: Attached scsi generic sg0 type 0
sd 5:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 5:0:0:0: [sda] Attached SCSI disk
usb 1-3: New USB device found, idVendor=17ef, idProduct=602b
usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-3: Product: Lenovo Multimedia Remote with Keyboard N5902
usb 1-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Lenovo Multimedia Remote with Keyboard N5902 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:17EF:602B.0001/input/input6
hid-generic 0003:17EF:602B.0001: input,hidraw0: USB HID v1.11 Keyboard [Lenovo Multimedia Remote with Keyboard N5902] on usb-0000:00:14.0-3/input0
input: Lenovo Multimedia Remote with Keyboard N5902 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:17EF:602B.0002/input/input7
hid-generic 0003:17EF:602B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Lenovo Multimedia Remote with Keyboard N5902] on usb-0000:00:14.0-3/input1
usb 1-6: new high-speed USB device number 3 using xhci_hcd
e1000e 0000:00:1f.6 eth1: registered PHC clock
e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) d0:50:99:89:07:ba
e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth1: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
usb 1-6: New USB device found, idVendor=05dc, idProduct=a81d
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: USB Flash Drive
usb 1-6: Manufacturer: Lexar
usb 1-6: SerialNumber: AAJRL1GO9ZX6PRLA
usb 1-6: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
usb 1-6: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
usb-storage 1-6:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-6:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 1-13: new full-speed USB device number 4 using xhci_hcd
tsc: Refined TSC clocksource calibration: 3695.999 MHz
usb 1-13: No LPM exit latency info found, disabling LPM.
usb 1-13: New USB device found, idVendor=0bda, idProduct=0821
usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-13: Product: Bluetooth Radio
usb 1-13: Manufacturer: Realtek
usb 1-13: SerialNumber: 00e04c000001
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
EXT4-fs (sda1): orphan cleanup on readonly fs
EXT4-fs (sda1): 5 orphan inodes deleted
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 35 bits of entropy available
Switched to clocksource tsc
Adding 8066044k swap on /dev/sda5. Priority:-1 extents:1 across:8066044k SSFS
systemd-udevd[395]: starting version 204
random: nonblocking pool is initialized
lp: driver loaded but no devices found
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
ppdev: user-space parallel port driver
[drm] Initialized drm 1.1.0 20060810
[drm] Memory usable by graphics device = 4096M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:0f: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
usbcore: registered new interface driver btusb
[drm] Initialized i915_bpo 1.6.0 20150522 for 0000:00:02.0 on minor 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
cfg80211: Calling CRDA to update world regulatory domain
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
i915_bpo 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915_bpo 0000:00:02.0: registered panic notifier
rtl8821ae: Using firmware rtlwifi/rtl8821aefw.bin
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: rtlwifi: wireless switch is on
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
device-mapper: multipath: version 1.7.0 loaded
init: cups main process (530) killed by HUP signal
init: cups main process ended, respawning
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915_bpo])
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: Calling CRDA for country: IN
sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x19
sound hdaudioC0D0: Rear Mic=0x18
sound hdaudioC0D0: Line=0x1a
scsi 6:0:0:0: Direct-Access Lexar USB Flash Drive 1100 PQ: 0 ANSI: 4
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] 125038592 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
cfg80211: Regulatory domain changed to country: IN
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
init: failsafe main process (704) killed by TERM signal
init: samba-ad-dc main process (884) terminated with status 1
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1350) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-stop pre-start process (1464) terminated with status 1
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[drm] RC6 on
e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
wlan0: authenticate with f4:f2:6d:70:34:28
wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
wlan0: send auth to f4:f2:6d:70:34:28 (try 1/3)
wlan0: authenticated
wlan0: associate with f4:f2:6d:70:34:28 (try 1/3)
wlan0: RX AssocResp from f4:f2:6d:70:34:28 (capab=0x411 status=0 aid=5)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: US
wlan0: deauthenticating from f4:f2:6d:70:34:28 by local choice (Reason: 2=PREV_AUTH_NOT_VALID)
wlan0: authenticate with f4:f2:6d:70:34:28
wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
wlan0: send auth to f4:f2:6d:70:34:28 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticated
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: Calling CRDA for country: IN
wlan0: associate with f4:f2:6d:70:34:28 (try 1/3)
cfg80211: Regulatory domain changed to country: IN
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
wlan0: RX AssocResp from f4:f2:6d:70:34:28 (capab=0x411 status=0 aid=5)
wlan0: associated
cfg80211: Calling CRDA for country: US
cfg80211: Regulatory domain changed to country: US
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: Limiting TX power to 27 (30 - 3) dBm as advertised by f4:f2:6d:70:34:28
ahci 0000:00:17.0: port does not support device sleep
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
e1000e: eth1 NIC Link is Down
systemd-hostnamed[4409]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
sdb: detected capacity change from 64019759104 to 0
usb 1-6: USB disconnect, device number 3
systemd-hostnamed[7984]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[8747]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[12004]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
sound hdaudioC0D2: HDMI: ELD buf size is 0, force 128
sound hdaudioC0D2: HDMI: invalid ELD data byte 0
sound hdaudioC0D2: HDMI: ELD buf size is 0, force 128
sound hdaudioC0D2: HDMI: invalid ELD data byte 0
sound hdaudioC0D2: HDMI: ELD buf size is 0, force 128
sound hdaudioC0D2: HDMI: invalid ELD data byte 0
sound hdaudioC0D2: HDMI: ELD buf size is 0, force 128
sound hdaudioC0D2: HDMI: invalid ELD data byte 0
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at /build/linux-lts-vivid-naHA4g/linux-lts-vivid-3.19.0/ubuntu/i915/intel_display.c:11100 intel_check_page_flip+0x10d/0x120 [i915_bpo]()
Kicking stuck page flip: queued at 395108, now 395113
Modules linked in: nls_iso8859_1 ctr ccm snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm x86_pkg_temp_thermal coretemp snd_seq_midi snd_seq_midi_event kvm_intel kvm snd_rawmidi crct10dif_pclmul dm_multipath crc32_pclmul scsi_dh bnep arc4 rfcomm ghash_clmulni_intel joydev snd_seq snd_seq_device aesni_intel snd_timer rtl8821ae btcoexist rtl_pci aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd rtlwifi mac80211 snd cfg80211 serio_raw btusb soundcore bluetooth shpchp i915_bpo acpi_pad i2c_hid intel_ips mac_hid drm_kms_helper drm i2c_algo_bit binfmt_misc parport_pc ppdev lp parport dm_mirror dm_region_hash dm_log uas usb_storage hid_generic usbhid hid mxm_wmi e1000e psmouse ptp r8169 pps_core ahci mii libahci wmi video
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.19.0-32-generic #37~14.04.1-Ubuntu
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z170M-ITX/ac, BIOS P2.30 04/19/2016
ffffffffc041a890 ffff880475c03d58 ffffffff817af41b 0000000000000000
ffff880475c03da8 ffff880475c03d98 ffffffff81074daa 0000000000200096
ffff88045ebc8800 ffff880462a33000 ffff88045ebc89a8 0000000000000000
Call Trace:
[] dump_stack+0x45/0x57
[] warn_slowpath_common+0x8a/0xc0
[] warn_slowpath_fmt+0x46/0x50
[] intel_check_page_flip+0x10d/0x120 [i915_bpo]
[] gen8_irq_handler+0x38e/0x5a0 [i915_bpo]
[] ? read_tsc+0x9/0x10
[] handle_irq_event_percpu+0x3e/0x1a0
[] handle_irq_event+0x41/0x70
[] handle_edge_irq+0x7f/0x120
[] handle_irq+0x22/0x40
[] do_IRQ+0x51/0xf0
[] common_interrupt+0x6d/0x6d
[] ? cpuidle_enter_state+0x70/0x170
[] ? cpuidle_enter_state+0x5d/0x170
[] cpuidle_enter+0x17/0x20
[] cpu_startup_entry+0x334/0x3d0
[] rest_init+0x77/0x80
[] start_kernel+0x499/0x4a6
[] ? set_init_arg+0x55/0x55
[] ? early_idt_handler_array+0x120/0x120
[] x86_64_start_reservations+0x2a/0x2c
[] x86_64_start_kernel+0x143/0x152
---[ end trace 564701d83d6b985f ]---
sound hdaudioC0D2: HDMI: ELD buf size is 0, force 128
sound hdaudioC0D2: HDMI: invalid ELD data byte 0
sound hdaudioC0D2: HDMI: ELD buf size is 0, force 128
sound hdaudioC0D2: HDMI: invalid ELD data byte 0
sound hdaudioC0D2: HDMI: ELD buf size is 0, force 128
sound hdaudioC0D2: HDMI: invalid ELD data byte 0